Tank Delivery Information
Delivery and Distribution
Where do we deliver?
Agriculture and plumbing products
Zone 1, free delivery. Our distribution network covers Victoria, Southern New South Wales, South Australia, South East Queensland and North East New South Wales. We’ll deliver straight to your location, or to the store where you bought your product.
Delivery is free for tanks exceeding 13,000L. For tanks under that, there’s a $165 inc GST charge to deliver to site. Most smaller items are delivered free to your local Polymaster distributor store.
Zone 2, delivery charges apply. Anywhere outside Zone 1. Get in touch and we’ll work out the options and costs for your location.
What Zone 1 actually covers
In New South Wales and South Australia, Zone 1 runs from Corryong on the Victorian border up to Canberra and Goulburn, across to Bathurst and Dubbo, then down and across to Mildura. From Broken Hill it crosses the South Australian border to Orroroo and Port Augusta, and everything below that line in South Australia is covered.
In South East Queensland and northern New South Wales, Zone 1 is roughly a 550km radius from Ipswich, bordered by Bundaberg, Theodore, Roma, St George, Narrabri, Tamworth and Port Macquarie.
Chemical tanks and engineered solutions
Freight on chemical tanks and engineered solutions is calculated per project. Every industrial tank is different, so talk to our industrial team about your delivery.
Looking for a stockist?
We sell through more than 1,600 agricultural and plumbing stores across Victoria, South Australia, New South Wales and South East Queensland. Give us a call on 1800 062 064 and we’ll point you to your nearest one.
SEO TAGLINE
What to expect from a Polymaster delivery
You don't need to arrange help
Nobody is required to help the driver unload. Give us clear access and a marked spot, and our driver will unload as close to it as they safely can.
We'll call you before we arrive
Our logistics team contacts you around 7 days before delivery to confirm your address, run through access, and check whether you’ll be on site.
Fittings are already installed
Your overflow, strainer and outlets go on at the factory. That saves you money at installation, and no plastic swarf ends up inside the tank.
SEO TAGLINE
Preparing your site for delivery
Our tanks are large, which makes the truck loads long and high. A bit of preparation before delivery day makes the whole thing quicker and safer.
Ensure access
Clearance required for the truck and trailer is 19 metres long, 5 metres high and 3.5 metres wide. Check for low branches and powerlines along the route in. Make sure the gate or entrance is wide enough, and that there’s turning room for a 19 metre truck and trailer, roughly the size of a normal roundabout. You’ll also need a flat, clear area of 5 metres by 5 metres to unload into.
View Product
Have the right lifting equipment
Larger tanks need specific equipment to unload safely. Depending on the size, type and fittings, that might be a forklift, a forklift with extensions, or a crane. Check the full list below to find your product, and make sure the gear is on site on the day.
View Product
Prepare your tank site
The site must be firm, level and flat. A well compacted sand base or another consolidated fill such as crushed dust works well. The fill needs to be free of rocks, stones and anything sharp. Make the base 75mm to 100mm deep and at least 600mm larger in diameter than the tank base, with a retaining wall around the outside to stop erosion.
View Product
Prepare your overflow pipe
Pipe the overflow well clear of the tank so it can’t undermine the base.
Download the rainwater tank installation guide